Wholesale 6*6 7*7 8*8 Straight Square Tubular Heating Element Flexible Hot Runner Mould Manifold Heater

• Customization: Available
• Certification: RoHS, ISO9001, CE
• Type: Electric Coil
• Form: Heating Wire
• Shape: Tubular
• Diameter: 5mm, 6mm, 6.5mm, 8mm, 8.5mm, 6X6mm,8X8mm
• Length: Customized
• Power Tolerance: +5%- -10%
• Transport Package: Carton Box
• Specification: customized
• Trademark: VINSON
• Origin: China
• HS Code: 85168000
• Production Capacity: 1000PCS/Week

Product Description

Flexible tubular heaters can be manually bent in all three directions.

Flexible tubular heaters make the heating of complex platens, shapes, and machines, possible. Flexible tubular heaters  are completely flexible, and may be shaped at will. Around pipes, along platen paths, and other challenging shapes. Excellent replacements for traditional tubular heaters, which are not flexible and most can be custom made in most cases.

Simplify your machine design, or reduce the maintenance time and cost by using our flexible tubular heaters.

• Easy installation with a uniform finish
• Can be formed by hand
• Stored in a straight condition to save storage space
• No special installation tools required
• Up to 75% sheath contact with round and square hotflex heaters
• Rapid heat-up times
• Minimal temperature difference between heater sheath and heated tool
• 3-dimensional groove geometry possible
• Industry's smallest bending radius
• Flexibility enables heat to be located where it is needed, an improvement over cartridge heaters
• Reduced energy costs, so tool mass can be reduced

Technical key features of the hotflex flexible tubular heater include:

• Stainless Steel sheath material
• Sheath temperature of heating element maximum 700°C / 1290°F
• Standard connection voltage of 230V
• High voltage resistance* of 1000V AC
• Insulation resistance* greater or equal to 5 MOhm at 500V DC
• Leakage current* less than 0.5 mA at 253V AC
• Wattage tolerance +/-10%
• Length tolerance +/-1.5%

	Size: D8mm/6mm/6.6mm/8.5mm	Square:6x6mm 8x8mm
Length	300-1550mm	400-2100mm
Max Current	12A	15A
Nominal Voltage	Less than 230V	Less than 400V
Wattage	+-10%	+-10%
Dielectric Strength	1.5HV	1.5HV
Insulation MΩ	More than 5 MΩ	More than 5 MΩ
Leakage Current	Less than 0.5 mA	Less than 0.5 mA
Minimum Unheated	30mm	35mm
Terminal Pins	M3 x .50mm / plain post	M4 x .70mm

 

Tubular heaters are used for almost every kind of heating appliances. They are easy to form and feature highest mechanic stability and electric properties at the same time.
Flexible tubular heaters have developed to be a new industry standard for the use in heating platens, welding bars and manifolds.
Screw in tubular heaters are standardised for use in liquids like water.
Finned tubular heaters are especially for air-heating-cabinets or tunnels.
Important and useful characteristics of tubular heaters are that they can be formed into virtually any shape, brazed or welded to any metal surface, and cast into metals.

Industry use:
Finned Tubular elements
Animal Incubators for Prenatal Care
Ducts
Epoxy Curing
Food Service Equipment
Furnaces
Fusing Laminated Sheets Together
Hopper and Silo Heaters - Plastic

Food Agriculture

Kettles and Tanks
Ovens - Process, Curing, Food
Paint and Enamel Baking Equipment
Plastic Sheet Bending Equipment
Spas and Hot Tubs
Steam Tables
Sterilizers and Autoclaves
Stretch Wrapping Equipment
Ovens

Textile and Chemical Dryers
Welding Preheat Equipment
Air Heating-Free Air Heating
Contact Heating
Radiant Heating
Liquid Heating (Direct Immersion)
Oil Heating
Air & Gas Heating
Dryers